Solid hardwood flooring

Solid hardwood flooring is a classic type of wooden floors, know for centuries. Our solid flooring is produced from highest quality, carefully selected raw material. Strict quality control is ensured within all manufacturing stages, from sawing and kiln drying, up to oiling and waxing. It allows us to offer you the finest product that will please your eyes and feet for decades, and increase your real estate value.

Construction

Each board is milled from a single piece of Oak wood. Boards are not glued of finger-jointed. Flooring boards have tongue and groove on all four edges, as well as bevels. Our solid hardwood boards are factory sanded and ready for installation.

Sizes

Available solid oak flooring sizes:

15 x 130 / 160 x 600 – 3000 mm
21 x 120 / 140 / 160 / 180 / 200 x 800 – 2800 mm

Installation

15 mm thickness solid flooring boards are suitable for installation on plywood, OSB or similar wooden subfloor. Installation is performed by gluing and nailing the flooring boards to the subfloor. 21 mm thickness flooring is suitable also for installation on wooden battens (usually 45 x 45 cm, approximately 40 cm distance between battens). We do not recommend installation of solid flooring on concrete subfloors (but we do offer Engineered Flooring suitable for that). If you have a concrete subfloor and wish to install solid flooring, we recommend first to install a layer of plywood at least 12 mm thick, directly on concrete. Then install solid flooring on plywood.

Finishing

Finishing can be done both at the factory, as well as after installation. If you prefer to have your flooring pre-finished at the factory, we offer hardwax oil or classic oil treatment in various colors. in this case, your flooring is ready to be walked on right after installation. Such finishing provides high durability and is easy to care for. For factory finishing we use hardwax oil made by German manufacturer Hesse Lignal. We use only natural and environmentally friendly products for finishing.

Some of the realized solid oak floor projects

Grading

The flooring boards are graded in five grades, depending on amount of knots and discoloration. However, there are no loose knots even in the lowest grades; all knots and cracks are filled with putty. The difference between grades is only visual, there are no differences in practical use. Below you can see photos of unfinished boards. Of course, any grade parquet boards can be finished in color according to customer’s choice.

Oak Premium

Nearly no knots, separate pin knots ≤5mm in diameter allowed. Premium grade flooring is usually installed in exclusive luxury interiors.

Oak Select

Small knots allowed, no sapwood allowed.

Oak Living

Small knots and sapwood allowed. Sapwood is the outer layer of wood, which is lighter in color. This is one of the most popular grades, a great choice if you would like to see some wood characteristics, but would like to avoid larger knots which are present in Classic and Rustic grades.

Oak Classic

Substantial color and texture variations allowed, large knots allowed allowed. No sapwood allowed.

Oak Rustic

Substantial color and texture variations allowed, large knots and sapwood allowed. Rustic grade is one of the most popular grades among our products, it displays the natural beauty of wood as it is. Each board has its own unique texture.